High overload ability of our PSW7 charger is up to 300% rated power(20 sec.). PSW7 pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be ed (9.5V/10V or 10V/10.5V). Uses PFC(power factor correction) for charger, which has less power consumption than conventional units. It has 15s delay before transfer when AC resumes, and overload protection when our PSW7 pure sine wave inverter equips with generator. 10ms typical transfer time between battery and AC, which guarantees power continuity of PSW7 charger. Uses able input AC voltage (184-253V or 154-253V) for different kinds of loads. Our PSW7 charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**. It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type or for totally flat batteries. LCD status display, battery/AC priority switch, USB communication port are available for our PSW7 pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, /de power saver mode can be used too. Note:*For 1KW one. **For some models.

Economic type PSW7 series inverter with AC charger 1kw-6kw

 

Product Description

 

 

?Feature of PSW7 Series Inverter&Charger Inverter

• High overload ability of our PSW7 charger is up to 300% rated power(20 sec.).

• PSW7 pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).

• Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.

• It has 15s delay before transfer when AC resumes, and overload protection when our PSW7 pure sine wave inverter equips with generator.

• 10ms typical transfer time between battery and AC, which guarantees power continuity of PSW7 charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.

• Our PSW7 charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp**.

• It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.

• LCD status display, battery/AC priority switch, USB communication port are available for our PSW7 pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.

• Note:*For 1KW one. **For some models.

  

  ---

  
  

  
  

Product Parameter

---

Product Dominance

▼Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0VDC by default.

It can be customized to 10.5VDC.

▼AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.

It can be customized from 184-253VAC to 140-270VAC.

▼Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 3 seconds when SW3 setting position1.
In NIGHT CHARGER position,the inverter will stay in standby mode without sensing loads.It won't output any power even if a load is turned on when working on battery mode.

▼Frequency adjust:
The frequency of the inverter is arranged by the Sw4.
The factory default configuration for 220/230/240VAC inverter is 50Hz,and 60Hz for 100/110/120VACinverter.While the output freq can be easily changed once a qualified

freq is applied to the inverter.

---

Wiring

---

Detailed Images

---

Application

---

Company Profile

---

Exhibition

---

FAQ

?Q1.How is your product quality?
A: QC regularly check the quality.Our products were damaged less than 3% over the past five years. Regarded as a high quality inverter supplier.

?Q2.When the product have problem, how to solve it?
A:We have a professional after-sales team, in case of any problems, first contact us to help you solve, we have a 12 months warranty.We will track product usage until you are satisfied.

?Q3.Can you accept OEM, ODM service?
A:Yes, we accept OEM,ODM service.

?Q4.What kind of certificate you have?
A:Our company already achieve ISO, CCC, and for products, we have CE, ETL, UL .

?Q5. What's the payment term?
A: We accept TT,30% deposit and 70% before delivery.( >10000$US )

?Q6. How's the delivery time?

YIYEN ELECTRIC TECHNOLOGY COMPANY LIMITED